(added missing engineer) Tag: Visual edit |
|||
Line 10: | Line 10: | ||
* [[Professor Palin]] (Grade 5) |
* [[Professor Palin]] (Grade 5) |
||
* [[Chloe Sedesi]] (Grade 5) |
* [[Chloe Sedesi]] (Grade 5) |
||
+ | * [[Mel Brandon]] (Grade 5) |
||
== Grade 1 == |
== Grade 1 == |
Revision as of 21:38, 7 September 2019
Dirty Thrusters is an engineer modification that can be applied to thrusters. It increases maximum speed at the cost of increased thermal load.
It is available in 5 grades, with the highest grade offering up to 30% increase in top speed.
Availability
This modification can be applied by the following engineers, up to the maximum specified grade:
- Elvira Martuuk (Grade 2)
- Felicity Farseer (Grade 3)
- Professor Palin (Grade 5)
- Chloe Sedesi (Grade 5)
- Mel Brandon (Grade 5)
Grade 1
Primary Effects
Attribute | Min | Max | Benefit |
---|---|---|---|
Integrity | -6% | 0% | Negative |
Optimised Mass | -4% | 0% | Negative |
Optimal Multiplier | +4% | +10% | Positive |
Power Draw | +4% | 0% | Negative |
Thermal Load | +20% | 0% | Negative |
Materials Required
Grade 2
Primary Effects
Attribute | Min | Max | Benefit |
---|---|---|---|
Integrity | -12% | +1% | Negative / Positive |
Optimised Mass | -6% | -1% | Negative |
Optimal Multiplier | +10% | +14% | Positive |
Power Draw | +8% | +2% | Negative |
Thermal Load | +40% | +10% | Negative |
Materials Required
Grade 3
Primary Effects
Attribute | Min | Max | Benefit |
---|---|---|---|
Integrity | -18% | +4% | Negative / Positive |
Optimised Mass | -10% | -2% | Negative |
Optimal Multiplier | +14% | +20% | Positive |
Power Draw | +11% | +3% | Negative |
Thermal Load | +60% | +20% | Negative |
Materials Required
- 1 x Chromium
- 1 x Mechanical Components
- 1 x Specialised Legacy Firmware
Grade 4
Primary Effects
Attribute | Min | Max | Benefit |
---|---|---|---|
Integrity | -24% | +5% | Negative / Positive |
Optimised Mass | -12% | -4% | Negative |
Optimal Multiplier | +20% | +25% | Positive |
Power Draw | +15% | +5% | Negative |
Thermal Load | +80% | +30% | Negative |
Materials Required
Grade 5
Primary Effects
Attribute | Min | Max | Benefit |
---|---|---|---|
Integrity | -30% | +8% | Negative / Positive |
Optimised Mass | -16% | -5% | Negative |
Optimal Multiplier | +25% | +30% | Positive |
Power Draw | +20% | +8% | Negative |
Thermal Load | +100% | +40% | Negative |